MILLUMIN WISCONSIN SOFTWARE

After clicking you should see some movement handles appear. To do that, make sure you have the move-tool selected and click on the layer. The last thing is to make the syphon output from Proclaim fills the whole screen. When you're happy with your settings, click OK in the bottom right to return to the main screen. Additionally, you can adjust how much overlap there is to perform the edge blending (soft edge). In our case, we have two.Ĭhange the aspect ratio to the aspect ratio of each projector and select each projector in the monitors presented below. Here, change the number of outputs to the number of projectors you have. Then expand the tray on the left, expand Inputs, and drag the Proclaim Syphon input created in the previous step down to the first layer.Īfter adding the Syphon input to your layer, open Output settings in the toolbar.

In this tutorial, we'll focus on the multiscreen options and the edge-blending. It is expensive, but it can accomplish a whole lot of video and lighting effects and can be controlled via MIDI. Millumin is a very powerful piece of software. In the top of Syphoner, it will say “Please open a Syphon client”. Now we've created a Syphon source that we can use in Millumin. In our case, it was the one that was 1920x1080Īfter selecting the right one, hit the lock mode switch in the toolbar so that the preview won't negatively affect your frame rate. Look for one from Faithlife Proclaim that seems to match the resolution of the monitor. If you are using a Macbook Pro, you will not want to use your laptop’s Retina display because the pixel count is so large the frame rate will suffer dramatically.įor this monitor, we used a regular Dell monitor plugged into our laptop’s HDMI port.Īfter you go On Air in Proclaim, open Syphoner. We will need to send Proclaim’s output to a monitor whose only purpose is to be captured by Syphon. NOTE: Syphon is an open source framework for macOS that allows apps to send and receive video content from each other in a performant manor. This will create a Syphon source that we can use inside Millumin. In order to get Proclaim’s output to the two projectors, we will first need to capture Proclaim’s output with Syphoner. Millumin will handle sending the feed to the two Projectors, including handling the edge blending and overlap. We will capture Proclaim’s output with Syphoner and send it to Millumin.

1+ monitors to control Proclaim, Syphoner, and Millumin.

MILLUMIN WISCONSIN SOFTWARE

Proclaim does not support these wide aspect ratios natively, but can work with other software to accomplish this without too much difficulty. To accomplish this, you normally need to use multiple projectors and edge-blending to ensure that there are no gaps between the projected images and no bright spot for where the images overlap. Many churches would like to make use of double or triple wide display outputs to create stunning and immersive environments.

Millumin wisconsin